RADIOLINK R9DS RECEIVER

10-channel receiver Radiolink R9DS, 2.4 GHz, DSSS and FHSS spread spectrum, intended for transmitterthose AT9, AT9S and AT10. It supports S-BUS and PWM signals simultaneously. Thanks to its small dimensions, weight and speed of signal transmission, it is ideal for competitive drone models.

2 receiver operation modes:

• The red LED means work in the PWM signal (9 channels support).
• Blue / purple LED indicates S-BUS & PWM signal operation (10 channels total)

Changing the mode between operation in SBUS / PWM signals:

• Pressing the ID SET button twice quickly (within 1 second) will change the operating mode from the PWM SBUS signal. The operating mode will be indicated by the LED diode

Pairing the signal with the transmitter:

• 1. Place the transmitter and receiver within one meter
• 2. Turn on the transmitter and then the receiver
• 3. The receiver has a black binding button. Press it twice within two seconds. The LED will flash. After about eight flashes, the diode will start to burn with a constant light, thus signaling the correct pairing of the transmitter with the receiver.

Correct arrangement of the receiver's antennas ：

• 1. The antenna must not be twisted, as it will negatively affect the range of the receiver
• 2. The antenna must be at least 12.5 mm away from conductive materials such as metal, carbon strips, fuel tanks.
• 3. Place the antenna as far as possible from the motor, regulator and other electronics and sources of interference.

For safety, mount the receiver on a self-adhesive foam / sponge to reduce vibration and place it in a place that is protected against water and moisture.

Technical data:

• Number of channels:
  9 channels: 9 channels on the output in the PWM signal (red LED)
  10 channels: 10 channels on the output in SBUS / PWM signals (blue / purple led)
• Working voltage: 4.8-10V
• Current consumption: 38-45 mA （input voltage: 5V）
• Dimensions: 43 x 24 x 15 mm

• Sensitivity: 4096 points, (0.25 us / point)