A very powerful and fast, programmable, thin digital micromotor with titanium gears and an output shaft mounted on two ball bearings. Thanks to precision gears with minimal backlash and a flat 8mm-high housing, this unit is particularly suitable for aileron and flap control in RC F3K gliders, light gliders (F5J, etc.) and engine models with thin wing profiles. To ensure excellent cooling even under heavy load, the servo is housed in an aluminum case with feet for flat mounting.
A wide range of servo parameters can be programmed using the DSP-1 USB programmer/interface and a PC-based utility program:
STANDARD FUNCTIONS
- Dead zone: The width of the dead zone determines the amount of change in the control signal pulse width at which the position of the servo output shaft/lever does not change. MKS default setting = 1 µs or 1.1 µs
- Lock: it sets the behavior of the servo when it does not receive a control signal - It maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
- Max Duty: It limits the maximum power of the servo motor.
- Lower Pulse (minimum pulse width): The lower limit of the control pulse width and the corresponding servo swing value will be limited by this value.
- Neutral: Sets the width of the control pulses in the neutral/center position of the servo.
- Upper pulse (maximum pulse width): The upper limit of the control pulse width and the corresponding servo swing amount will be limited by this value.
- Boost: The power of the motor when starting from a standstill. The higher the value, the more force will start the motor.
Specifications:
- Torque at 3.7 V - 2.54 kg
- Torque at 4.8 V - 3.3 kg
- Torque at 6.0 V - 4.1 kg
- Torque at 7.4 V - 5 kg
- Torque at 8.2 V - 5.4 kg
- Speed at 3.7 V - 0.18 s / 60 degrees
- Speed at 4.8 V - 0.14 s / 60 degrees
- Speed at 6.0 V - 0.11 s / 60 degrees
- Speed at 7.4 V - 0.089 s / 60 degrees
- Speed at 8.2 V - 0.08 s / 60 degrees
- Control pulse width: 1520 µs
- Repetition rate: 333 Hz
- Ball bearings: x2
- Gear (pinions): metal
- Dimensions (length x width x height): 23 x 8 x 25.2 mm
- Weight: 11 g
- Motor type: coreless
*Follow the instruction manual included with the product