Voltage regulators
  • Out-of-Stock
HOBBYWING REGULATOR NAPIĘCIA 10A / 2-6SLiPol (UBEC)

HOBBYWING VOLTAGE REGULATOR 10A / 2-6SLiPol (UBEC)

12-5069
Out of stock

UBEC 10A, is a switchable DC power stabilizer; it is powered by a LiPo 2-6S battery, the output voltage is stabilized at a given value (5-8.4 V). The load capacity of UBEC is 10 A permanently, temporary 20 A in peak. This makes it suitable for large helicopters, multicopters, cars, ships or model airplanes.

It uses an advanced DC step-down converter circuit with efficiency in excess of 90%.
Four selectable output voltages (5.0V / 6.0V / 7.4V / 8.4V) suitable for all types of receivers, gyroscopes, servos, etc.
It is equipped with a BEC breakdown protection that prevents the supply voltage from entering the output and damaging the receiver, servos and other electronics.
It is equipped with other protection circuits, such as overcurrent protection, short circuit outputs and thermal protection, making its operation safer and more reliable.

LED indicator to indicate UBEC operating status.
External switch to easily turn UBEC on and off.
Aluminum housing for more efficient cooling and shielding of electromagnetic radiation.

Using UBEC:

  • Electric model with OPTO controller: Connect UBEC directly to the propulsion battery outputs and connect the UBEC output connector to the battery socket (or other free servo socket) on the receiver.
  • Electric model with regulator with built-in power stabilizer (BEC): Before connecting the UBEC, disconnect the red wire (+) on the controller servo cable to turn off the built-in BEC. Otherwise, the UBEC connection is the same as for the OPTO driver.
  • Combustion engine or sailplane model: Connect UBEC directly to the battery pack outputs and connect the UBEC output connector to the battery socket (or other free servo socket) on the receiver.

Tip: To reduce possible UBEC interference in the model, place it at least 5 cm from the receiver.

Technical data:

  • Constant current [A]: 10 (maximum instantaneous 20A)
  • NiXX cells: 5-18
  • LiXX Articles: 2-6
  • Output BEC voltage [V]: 5 - 8.4
  • Length [mm]: 43.1
  • Width [mm]: 32.3
  • Height [mm]: 12.5
  • Weight [g]: 36