LIPO VOLTAGE INDICATOR - TESTER / Low voltage alarm

Tester - alarm - voltage indicator.

The tester has three functions that can be combined with each other according to the diagrams shown in the photos.

Technical data:

• Working voltage: 5.2 - 26V DC (2 - 6S LiPo)
• Voltage threshold setting: 3.4 - 3.7V / cell (red LED)
• Beep level: ≥95db
• Dimensions: 20 x 28 x 10 mm
• Weight: 5g
  
  Tester functions.
  
  1. The function of monitoring the state of the battery voltage F1.
  
  If the total voltage drops below the set alarm threshold, the tester will alarm by flashing the diode and an acoustic signal.
  
  Alarm threshold ranges available: 3.4 / 3.5 / 3.6 / 3.7V / cell.
  
  Entering the voltage threshold:
  
  Hold the button for 3 seconds to enter the voltage threshold setting. Press the button to set the alarm threshold between 3.4 ~ 3.7V / Cell (red LED). The value will be saved if you don't do anything for 10 seconds.
  
  If the total voltage of the LiPo packet is not within the following range, the tester will alarm by pulsating the diode and with a sound signal.
  
  2S / 7.4 - 8.6V
  3S / 11.1 - 12.9V
  4S / 14.8 - 17.2V
  5S / 18.5 - 21.5V
  6S / 22.2 - 25.8V
  
  2. Discovery F2 buzzer function.
  
  The tester is connected to one receiver channel (eg AUX), after turning it on, it emits a sound and light signal.
  
  3. F3 signal loss alarm function.
  
  In case of signal loss (if the transmitter is turned off), the tester emits an acoustic and light signal. This function is useful when searching for a model.
  
  Launching the function.
  
  Connect the tester to the channel of the "THRO" receiver. Turn on the power of the transmitter and then the power of the model. Turn off the transmitter and wait one minute, then turn on the transmitter.