MKS SERWO DS450 DIGITAL (3.1kg - 0.12s/60°)

Very powerful and fast programmable digital microservo with metal gears and output shaft mounted on two needle bearings and one self-lubricating bearing

A wide range of servo parameters can be programmed using the DSP-1 USB programmer/interface and a PC-based utility program:

STANDARD FUNCTIONS

• Dead Band: Dead band width determines the amount of change in control signal pulse width at which the position of the servo output shaft/lever does not change. MKS default setting = 1 µs or 1.1 µs
• Lock: it sets the behavior of the servo when it does not receive a control signal - It maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
• Max Duty: It limits the maximum power of the servo motor.
• Pulse Lower (minimum pulse width): The lower limit of the control pulse width and the corresponding servo swing value will be limited by this value.
• Neutral: Sets the width of the control pulses in the neutral/center position of the servo.
• Pulse Upper (maximum pulse width): The upper limit of the control pulse width and the corresponding servo swing amount will be limited by this value.
• Boost: The power of the motor when starting from a standstill. The higher the value, the more force will start the motor.

Specifications:

• Torque at 4.8 V - 3.10 kg
• Torque at 5.0 V - 3.22 kg
• Speed at 4.8 V - 0.12 s / 60 degrees
• Speed at 5.0 V - 0.115 s / 60 degrees
• Control pulse width: 1520 µs
• Repetition rate: 333 Hz
• Ball bearings:
• Gear (pinions): metal
• Dimensions (length x width x height): 22.5 x 10 x 23.8 mm
• Weight: 9.5 g
• Motor type: coreless

*Follow the instruction manual included with the product