MKS SERWO HV93 DIGITAL (3.2kg - 0.05s/60°)

Powerful and ultra-fast programmable digital micro servo with metal gears and output shaft mounted on two ball bearings. Ideal for cyclic mini helicopters of 380-420 in size, the servo is housed in an aluminum case to ensure ideal cooling even under heavy loads.

A wide range of servo parameters can be programmed using the DSP-1 USB programmer/interface and a PC-based utility program:

STANDARD FUNCTIONS

• Dead zone: The width of the dead zone determines the amount of change in the width of the control signal pulse at which the position of the servo output shaft/lever does not change. MKS default setting = 1 µs or 1.1 µs
• Lock: it sets the behavior of the servo when it does not receive a control signal - It maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
• Max Duty: It limits the maximum power of the servo motor.
• Lower Pulse (minimum pulse width): The lower limit of the control pulse width and the corresponding servo swing value will be limited by this value.
• Neutral: Sets the width of the control pulses in the neutral/center position of the servo.
• Upper pulse (maximum pulse width): The upper limit of the control pulse width and the corresponding servo swing amount will be limited by this value.
• Boost: The power of the motor when starting from a standstill. The higher the value, the more force will start the motor.

Specifications:

• Torque at 6.0 V - 2.2 kg
• Torque at 7.4 V - 2.8 kg
• Torque at 8.2 V - 3.2 kg
• Speed at 6.0 V - 0.07 s / 60 degrees
• Speed at 7.4 V - 0.06 s / 60 degrees
• Speed at 8.2 V - 0.05 s / 60 degrees
• Control pulse width: 1520 µs
• Repetition rate: 333 Hz
• Ball bearings: x2
• Gear (pinions): metal
• Dimensions (length x width x height): 23 x 12 x 27.25 mm
• Weight: 19.9 g
• Motor type: coreless

*Follow the instruction manual included with the product