MKS SERWO HV6130 DIGITAL (8.1kg - 0.10s/60°)

A very powerful and fast programmable thin digital microservo with titanium gears mounted on three ball bearings and two needle bearings. With precision gears with minimal backlash and a 10mm high flat housing, the device is particularly suitable for aileron and flap control in gliders (F3B, F3F, F3J, F5J, etc.) and engine models with thin wing/tail profiles. To ensure excellent cooling even under heavy loads, the servo is housed in an aluminum housing with standard feet

A wide range of servo parameters can be programmed using the DSP-1 USB programmer/interface and a PC-based utility program:

STANDARD FUNCTIONS

• Dead zone: The width of the dead zone determines the amount of change in the control signal pulse width at which the position of the servo output shaft/lever does not change. MKS default setting = 1 µs or 1.1 µs
• Lock: it sets the behavior of the servo when it does not receive a control signal - It maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
• Max Duty: It limits the maximum power of the servo motor.
• Lower Pulse (minimum pulse width): The lower limit of the control pulse width and the corresponding servo swing value will be limited by this value.
• Neutral: Sets the width of the control pulses in the neutral/center position of the servo.
• Upper pulse (maximum pulse width): The upper limit of the control pulse width and the corresponding servo swing amount will be limited by this value.
• Boost: The power of the motor when starting from a standstill. The higher the value, the more force will start the motor.

Specifications:

• Torque at 6.0 V - 6 kg
• Torque at 7.4 V - 7.6 kg
• Torque at 8.2 V - 8.1 kg
• Speed at 6.0 V - 0.14 s / 60 degrees
• Speed at 7.4 V - 0.11 s / 60 degrees
• Speed at 8.2 V - 0.10 s / 60 degrees
• Control pulse width: 1520 µs
• Repetition rate: 333 Hz
• Ball bearings: x3
• Gear (pinions): metal
• Dimensions (length x width x height): 30 x 10 x 29.8 mm
• Weight: 22.5 g
• Motor type: coreless

*Follow the instruction manual included with the product