Sale
DJI QUADROCOPTER PHANTOM 2 (DJI0309)

QUADROCOPTER PHANTOM 2 - DJI (for parts)

€0.23
08-1210
DJI
In stock

Model for spare parts, if you are looking for a part for this model, write to us and we will check availability and give you a price

New Phantom 2 Bundle!
The Phantom 2 is fully assembled, programmed and ready to fly, and thanks to Naza-M V2 smart electronics with GPS, it allows you to take off "straight out of the box". Flying with it does not require any previous experience with helicopters or multicopters - just an open mind and a willingness to learn. This learning will be easy and fast. There are two flight modes with automatic steering and "fly-by-wire" stabilization at your disposal. The electronics on board ensure a stable flight.

The basis of the model is a compact housing made of durable plastic, high-class brushless motors, control electronics and a power pack. The model is powered by four brushless motors with propellers 9.4x5. The battery is powered by a Li-Po 5200 mAh pack with a built-in discharge indicator, which is stored in a compartment inside the model. The LED indicator is used to signal the operating states. High-brightness lights are also mounted on the bottom of each arm - the front arm is red, the rear is flashing green or yellow (depending on the selected flight mode). The chassis is a pair of plastic profiles that also house the receiver's antennas. New GPS / Compass sensor with antistatic protection.

To control the model, we get an innovative 2.4 GHz FHSS transmitter with two universal sticks to control the basic functions (up / down, forward / back, left / right and rotation around the vertical axis) and two three position switches to select flight and intelligent modes. model orientation control modes. The transmitter comes in Mode 2, but it's easy to customize the software to suit your needs. The descent speed of the model is limited by the software to improve safety and stability.
The transmitter is powered by an integrated Li-Pol battery. The battery is charged via a micro USB that is located on the bottom of the transmitter.

The heart of the Phantom 2 is the Naza-M V2 intelligent control unit, which can work in two modes of automatic stabilization:

Position stabilization mode "Atti mode." Automatically stabilizes the drone in one position in all axes. The autopilot ensures the stability of the model when you can enjoy the flight or record a great shot. Only the position is stabilized by the model, not the geographic location. When the signal from the transmitter is lost, it goes into emergency mode - after a while it rises automatically and after a while it lands on the ground, where it is now. This mode is suitable for recreational flights for pilots with light experience.

GPS stabilization mode "Atti + GPS", the controller automatically stabilizes the drone in all axes. To use this mode, you must have a GPS module and a compass sensor (magnetometer) installed that provides additional information about geographic location (longitude, latitude, altitude) and course. Thanks to the automatic positioning of the model, not only will it stabilize, but also its geographical location will not change.
This mode is suitable for aerial photography where the autopilot allows you to switch to other activities not directly related to the drone control (e.g. camera control).
This function is factory set.

Of course, the controller monitors the battery voltage - a low level is indicated by an intense red LED indicator. Flashes and signals that it's time to land.

All these functions are pre-programmed and configured at the factory.

The set also includes the best-in-class, 3-axis DJI Zenmuse H4-3D gimbal for GoPro Hero4 cameras. Due to its high accuracy, high stabilizing ability, low weight and ease of use, it is a widely used stabilizer in film and television production, advertising, aerial photography and video recording.
The gimbal is designed for GoPro Hero4 cameras with which it is fully compatible.

Technical data:

Model weight: 1000g
Accuracy:
Vertical: 0.8m
Horizontal: 2.5 m
Maximum deviations of the angular velocity: 200 ° / s
Max Tilt Angle: 35 °
Max climb speed:
Ascent: 6m / s
Descent: 2m / s
Max Flight Speed: 15m / s (not recommended)
Diagonal: 350mm
Flight time: up to 25min
Take-off weight: ≤1300g
Working temperature:
-10 ° C ~ 50 ° C

Power:
3S LiPo (11.1V)
Capacity: 5200mAh

2.4 GHz remote control
Working frequency: 2.4GHz
Range (in open space): up to 1000m
Receiver sensitivity (1% ZA): -97dBm
Working current / voltage: 120mA@3.7V
Built-in LiPo pack: 3.7V, 2000mAh

The RC kit includes:
  • Phantom 2 ready to fly
  • GPS / Compass module
  • 2.4 GHz transmitter
  • Zenmus H4-3D gimbal adapted to the GoPro Hero4 camera
  • Set of four pairs of propellers
  • Li-Po battery 5200 mAh 3S 11.1V
  • LiPo charger
  • Screwdriver Philips
  • USB cable and manual (original English manual and utility is available for download on the DJI website)
And what the Phantom 2 flight shots look like, see here:

verified_user

In the industry since 1991.

Many years of RC models experience.
add_shopping_cart

Item availability

The certainty of the availability of the goods visible on the website.
card_giftcard

SPECIAL OFFERS

Weekly deals and promotions.