PULSAR REGULATOR B-20

NEW! With forward/reverse function (switchable via transmitter)

PULSAR brushless controllers impress with high quality, performance and reliability. They are ideally suited for all commercially available brushless motors (outrunner or inrunner). LiPo, NiMH or NiCD batteries can be used. The regulator automatically detects the number of cells. Thanks to the use of modern, high-quality SMD components, the internal resistance of the regulators is extremely low. High clock frequency ensures high resolution and control sensitivity.

Highly flexible and temperature-resistant silicone leads highlight their high quality.

Technical data
Number of cells = 2 -4 LiPo / 5-12 NiMH/NiCD
Load (continuous) = 20A
Load (short term) = 30A
Integrated receiver power supply (BEC) = 5V/6V / 4A
Weight = 35g including all cables and connectors
Dimensions = 60x25x10mm

Adjustable functions
- Brake (off / soft / medium / hard)
- Motor rotation direction (forward / reverse)
- Battery type (LiPo / NiMH / NiCD)
- Cut-off mode - motor running (reduced power = 70%, OFF)
- Cutoff voltage for LiPo (3.0V / 3.2V / 3.4V / 3.6V)
- Cut-off voltage for NiMH / NiCD (50% / 60%)
- Initial behavior (standard / soft)
- Timing (AUTO / low 5° / medium 15° / high 25°)
- SMR function (ON / OFF)
- SR function (ON/OFF)
- Adjustable BEC (5 V or 6 V, default setting = 5 V)

Product Features
- Pre-assembled with yellow XT60 connector and 3.5mm gold connectors (no soldering required)
- 32-bit processor
- Extremely sensitive control behavior
- Selected, high-quality MOSFET transistors
- Powerful, integrated BEC receiver power supply
- Easy to configure with optional programming box
- Completely pre-configured at the factory
- Proven top quality
- Maximum reliability

Programming box #15966

*Follow the instruction manual included with the product