HOBBYWING REG. OBROTÓW SEAKING 60A-V3

Programmable microprocessor controller with water cooling for AC motors without sensors ("brushless, sensorless") designed based on the capabilities of the latest semiconductor technology with excellent performance properties while maintaining a very simple and user-friendly operation. It is used to control the speed of AC motors in ship models (especially motor boats) powered by NiCd / NiMH and Li-Poli / Li-ion batteries. The waterproof housing and water cooling make installation and use much easier. It is equipped with a switchable SBEC power stabilizer that supplies power to the receiver and servos from the drive battery. The controller is programmed using a Hobbywing LED transmitter or programmer (sold separately).

DESCRIPTION AND FUNCTIONS OF THE CONTROLLER:

• The durability of the SEAKING V3 series controllers complies with the IP67 standard. (Note: If water enters the regulator connectors, dry all connectors thoroughly after use to prevent oxidation of their metal parts)
• Patented "Copper Bar Heat Conduction" technology, water cooling system and power MOSFETs with extremely low internal resistance increase the reliability of the drivers and their resistance to overloads
• Brand new software specially developed for RC boats with excellent starting and acceleration properties. In addition, it has excellent resistance to sudden load changes caused by surfacing and immersion while driving
• Suitable for most AC marine sensorless motors powered by 2-3S LiPo / Li-ion batteries or 5-10 NiCd / NiMH cells
• For power supply from NiCd, NiMH, Li-poly, Li-ion, Li-Fe batteries
• Powerful, switchable BEC power stabilizer with a load capacity of up to ...
• Two operating modes: uni-directional and bi-directional for various applications - motor boats and scaled-down models
• 8 adjustable timings ensure compatibility with most sensorless AC motors
• A number of protection functions: protection against voltage drop, thermal protection of the controller, protection against loss of the control signal specially adapted to RC boats
• Signaling of operation states of 2 LEDs
• Water cooling, the possibility of additional installation of a fan
• Special socket for programming (can also be used to power the fan)
• Easy programming thanks to the pocket LED programming box at home and on the water (not included)
• Gas span calibration for a perfect match to the control signal from the RC kit.

PROGRAMMABLE FUNCTIONS:

• Operating mode: unidirectional - for motor and racing boats. The bidirectional mode also allows reversing and is suitable for scaled-down models and recreational / sports driving
• LiPo cell count: You can choose to automatically detect cell count or set the cell count manually to achieve 100% reliable voltage protection function
• Supply voltage drop protection: If the drive battery voltage drops below the set threshold for 2 seconds, the engine power will be reduced to 50%. You can select the "unprotected" mode or the values 2.8, 3.0, 3.2 or 3.4 V / Art
• Time: adjustable 0.00 °, 3.75 °, 7.50 °, 11.25 °, 15.00 °, 18.75 °, 22.50 °, 26.25 °
• Set the most appropriate value depending on the motor used. Correct timing value ensures smooth engine operation. In general, a higher clock speed will give a higher maximum power, but the efficiency of the engine will decrease and its operating temperature will increase.

PROTECTIVE FUNCTIONS OF THE REGULATOR:

• Supply voltage drop protection: If the drive battery voltage drops below the set threshold for 2 seconds, the engine power will be reduced to 50%
• Thermal protection of the controller: If the controller temperature exceeds the factory-set value, the controller will limit the motor power to 50%. Full power will be restored when the controller temperature drops below 80 ° C.
• Loss of gas signal: The controller turns off the engine if there is no gas control signal from the receiver for 0.1 s. After receiving a normal signal, the controller resumes normal operation.

Technical data:

• for boat models
• Type: for brushless motors
• Constant current[A]: 60
• Peak current[A]:
• Number of NiXX cells: 5 - 10
• Number of LiXX cells: 2 - 3
• BEC voltage[V]: 6
• BEC current[A]: ...
• Length[mm]: 68
• Width[mm]: 38.5
• Height[mm]: 25.6
• Weight[g]: 95
• Adjustment: one-way, two-way
• Programmable: Yes