FOXY VOLTARIO S30 (1RC21521)

Voltario S30 is an intelligent electronic fuse for one servo with adjustable operating current (max. 10A) connected with a telemetry sensor providing information on voltage, current and remaining energy. It is compatible with Futaba S.BUS2, Graupner HoTT, Multiplex MSB, JETI Duplex EX telemetry systems; connects between the receiver and the servo.

In the event of a fault / mechanical servo lock, when the current drawn by the servo increases, the Voltario S30 disconnects the servo in 0.5 seconds, thus preventing an overload on the RC's on-board electronics. During normal operation, it provides information about voltage, current consumption and energy consumed by the servo.

When using the Graupner HoTT and JETI sets, an extended menu is available that also allows you to set the Voltaria S30 directly on the transmitter.

Voltaria configuration with JETIBOX

After connecting to JETIBOX, you can display the current measured values:

• Tension
• Consumption pin order
• The amount of energy consumed
• Temperature

Settings - parameters:

• menu language (Czech, English, German, French, Italian)
• energy reset (after switching on, automatic when connecting a fully charged battery, manual)
  
• tripping current (servo disconnection when the set trip current value is exceeded - the higher the current in relation to the set value, the faster the fuse blows)
  

Technical data:

• Dimensions: 25 x 12 x 5mm
• Weight with cables: 4g
  
• Cable cross section: 0.25mm2 (23AWG)
  
• Constant Current: 10A
  
• Peak current: (2s) 30A
  
• Off-state current: 80 µA
  
• Own consumption: 20mA
  
• Supply voltage range: 4 - 12V
  
• Supported telemetry protocols: Futaba S.Bus2, Graupner HoTT, Multiplex MSB, JETI Duplex EX
  
• Overcurrent protection Yes

The FOXY Voltario S30 is designed and manufactured in the Czech Republic.