FUTABA 26SZ + R7208SB receiver

Product on order,

if you are interested in purchasing, please write to us and we will check the availability, offer you an attractive price and after accepting the offer, we will complete the order within 3 - 5 working days.

The advantage of the "custom-made product" is that it is from a "fresh" delivery from the importer, it is not "aged" on the store shelf. This is very important for the power batteries included in the kit.

Description translated by translator - may contain errors !

The latest high-end 26-channel mid-range RC kit using the FASSTest-2.4 GHz telemetry transmission system for sports and very advanced recreational modelers and their simple, complex and giant models. The transmitter can also be switched to T-FHSS Air (also telemetry) and S-FHSS transmission modes to use a wide range of Futaba air receivers with and without telemetry.

With the R7208SB receiver included in the kit, you have 8 PWM channels for classic servos (or up to 26 channels in 2 or 3 receiver mode) or the full 26 channels via the S.BUS and S.BUS2 buses; as well as telemetry data on the receiver's power supply voltage, the voltage of another external battery (such as a drive), and the signal strength received by the receiver. Additional telemetry data can be obtained from additional telemetry sensors connected to the S.BUS2 bus.

The T26SZ transmitter, in a perfectly sized housing, is equipped with a precise cross-control with adjustable ratchet/neutralizer position and lever angle; magnetic encoders are used instead of the usual potentiometers, ensuring long life and consistent performance. The T26SZ has 8 switches, 4 faders, 6 digital potentiometers and 2 rotary proportional controls.

For programming, a pair of pushbuttons and a large, backlit LCD color touchscreen display provide easy orientation in the intuitive menu. selected theometric or timing data can be displayed on an auxiliary LCD on top of the transmitter. The T26SZ has memory for 30 models, unlimited expandability via microSD card and a wide range of advanced mixing functions for aerobatic aircraft, gliders, helicopters and multicopters. In addition to displaying telemetry data on the main and auxiliary displays, a voice telemetry output (not included) is available in the handset jack.

The T26SZ is also equipped with a teacher-student jack and a jack for programming and setting S.BUS servos and CGY770/CGY755/CGY760R or GYA553 gyro systems. A USB charging/data port on top of the transmitter allows the T26SZ to be used directly as an RC simulator controller when connected to a PC via a USB cable, without the need for an additional USB interface.

A 2S 2000 mAh LiPo battery is used for power, and a standard 5 V/2 A USB charging adapter will be needed for charging.

FEATURE

• FASSTest 26CHtransmission system with 24 proportional channels and 2 switched DG channels, FASSTest 18CH with telemetry (16 proportional + 2 switched channels), superfast FASSTest 12CH (12 channels, telemetry only, receiver power voltage), T-FHSS Air with telemetry (16 proportional) and 2 switched channels), S-FHSS 2.4 GHz without telemetry (8 proportional channels), CRSF protocol for TBS Crossfire (one-way communication)
• 4.3" color backlit LCD touchscreen for quick and easy programming
• Auxiliary backlit LCD for telemetry/timer data display
• As many as 8 flight modes for superior model control in all conditions
• Full telemetry with data transfer from a wide range of sensors with SD card storage capability
• Memory for 30 models with unlimited expansion via SD card
• LiPo 7.4V 2000 mAh transmitter battery
• Telemetry voice output on headphone jack (3.5 mm jack)
• Upgradable software
• Freely assignable 4 sliding and 2 rotary controls, 8 switches, 6 digital strips
• Precision cross controls housed in 4 ball bearings with magnetic encoders instead of potentiometers
• Freely adjustable cross-control mode (it is not necessary to open the transmitter box to change the mode and adjust the strength of the neutralizing springs)
• Teacher-student socket
• Wireless teacher-student module so that Futaba RC kits operating on the T-FHSS Air transmission system can be used as student RC kits without the need for a cable connection
• Socket for programming S.BUS servos, updating S.BUS2 servo software, updating telemetry sensor and receiver software (including receiver channel mode settings), configuring DLPH-2 receiver backup systems, configuring CGY770/CGY755/CGY760R and GYA553 gyro systems, or systems connecting TBS Crossfire long-range remote control (CRSF protocol, one-way communication)
• USB data/charging socket to allow the transmitter to be used as an RC simulator control device on a PC, and to charge the transmitter battery with a 5 V/2 A USB AC adapter
• MicroSD 32MB-2GB card slot (allows to expand model memory, maintain model memory, update transmitter software, convert model data programmed in T14SG, FX-22, T12K transmitters, use model data programmed in T16SZ, T16IZ, T16IZ SUPER, T18SZ , FX-32 and FX-36 transmitters)
• Model names consisting of up to 15 characters
• Subtrims with added balancer function - the existing Subtrim function is supplemented with the ability to set the entire yaw waveform up to a 17-point curve for fine-tuning the motion of multiple servos controlling a single rudder together (one servo is selected as a reference and the motion of the others is fine-tuned relative to it)
• Reversing the direction of servo deflection
• Setting end points and deflection limits
• Setting the speed of the servo
• Data reset
• Reliable emergency deflection
• Servo speed setting
• Double deflection
• Set deflection waveform after 2 exponential curves or 17-point curves.
• Freely programmable mixes (10 mixes for each flight mode)
• Motor shutdown
• Safe idle
• Logically connected switches
• User menu (allows you to select only a few of the most frequently used program functions for greater clarity)
• Quick selection of mix switches (automatically selected by flipping a switch) and their on/off positions
• Ability to assign voice notifications to individual switch positions
• Ability to assign a photo to each model (displayed on the main page and model selection page)
• Servo and servo monitor
• Two timers (stopwatch or timer)
• Model running time
• Transmitter operating time
• Throttle position indication when turned on
• Adjustable display backlighting
• Cross-controller calibration
• Warning signaling - sound and vibration
• Range control
• Mode settings with 2 or 3 receivers, including operation with two/three receivers with automatic copying when using R7208SB or R7308SB receivers

Program menu for aerobatic aircraft

• 13 types of wings
• 3 types of tail surfaces
• 2 types of vertical tail surfaces (wings)
• Flap adjustment
• Differentiation of aileron deflection
• Mix of ailerons and flaps
• Mix of aileron and brake flaps
• Mix of ailerons and rudder
• Mix aerodynamic brake lift
• Mixed rudder and ailerons
• Mixed camber (trailing edge curvature)
• Mix elevator-camber
• Blend of flaps and elevators
• Kicked twist
• Butterfly tail surfaces
• Mixed elevator (elevator for 2 servos)
• Winged
• Mixing motor (for switch control with adjustable start and stop)
• Intelligent interface for configuring the Futaba GYA553 gyro system on the transmitter display with the option of wired or wireless connection (after reading the data from the wired gyro in advance, the number of functions is limited)
• 4 sequencers for controlling retractable landing gear and similar applications with adjustable synchronization of landing gear shin and landing gear door movements

Program menu for gliders

• 13 types of wings
• 3 types of tail surfaces
• 2 types of vertical tail surfaces (wings)
• Adjustment of flaps
• Differentiation of aileron deflection
• Mix of ailerons and flaps
• Mix of aileron and brake flaps
• Mix of ailerons and rudder
• Mix aerodynamic brake lift
• Mixed rudder and ailerons
• Mixed camber (trailing edge curvature)
• Mix elevator-camber
• Blend of flaps and elevators
• Butterfly mix
• Mix butterfly elevator
• Trim mix 1 a 2
• Butterfly tail surfaces
• Mixing elevator (elevator for 2 servos)
• Winged
• Mixing motor (for switch control with adjustable start and stop)
• Intelligent interface for configuring the Futaba GYA553 gyro system on the transmitter display with the option of wired or wireless connection (after reading the data from the wired gyro in advance, the number of functions is limited)
• 4 sequencers for controlling retractable landing gear and similar applications with adjustable synchronization of landing gear shin and landing gear door movements

Program menu for helicopters

• 8 types of cycling boards
• 9-point throttle curves
• 9-point collective curves
• Acceleration
• Autorotation
• Deviation and correction correction for cyclic board.
• Cyclic adjustment deviation limit
• Correction mixtures for gas
• Gyro gain control
• Mix collection needle
• Revolution
• Governor control
• Intelligent interface for configuring Futaba CGY755, CGY760R CGY770R gyro systems on the transmitter display with the possibility of wired connection (same full range of functions as in GPB-1) or wireless connection (after reading the gyro data via cable in advance) , limited number of functions)
• 4 sequencers for controlling retractable landing gear and similar applications with adjustable synchronization of movements of landing gear shins and landing gear doors

Program menu for multicopters

• Flight modes
• Deflection correction
• Dual deflection setting
• Freely programmable mixes
• Gyro gain control
• 4 sequencers to control retractable landing gear and similar applications with adjustable synchronization of landing gear shin and landing gear door movements

Telemetry functions

• Temperature
• Speed (with magnetic or optical sensor, with phase sensor for AC motors)
• Altitude/variometer
• True airspeed
• GPS
• Voltage
• Proud
• S.BUS2 servo sensor (current, temperature, lever angle)
• Flight recorder (recording telemetry data on SD card)
• EM-100 operating system engine
• Contronics controllers
• Hobbywing controllers (using SBM-2 interface module)
• Pixhawk® control units (using the SBS-01ML interface module)
• TL0 lock
• JetCat V10
• Power box

RC KIT INCLUDES

• Futaba T26SZ 2.4 GHz transmitter
• R7208SB FASSTest/FASST receiver
• Transmitter battery 7.4V LiPo 2000 mAh
• Transmitter strap
• USB cable
• Receiver configuration cable
• Instructions for use

*Follow the instruction manual included with the product.

Presentation of the transmitter in the video: