FUTABA T4PM Plus + R334SBS RECEIVER

Futaba RC four-channel computer control set using the 2.4GHz T-FHSS SR transmission system with super-fast response for competition and advanced recreational car and boat models. The transmitter can also be switched to transmission modes with T-FHSS telemetry or without S-FHSS telemetry, and thus uses a range of T-FHSS and S-FHSS receivers for RC cars and boats. With the included R334SBS T-FHSS SR/T-FHSS receiver, you have 4 PWM channels for classic servos and the ability to transmit telemetry from sensors connected to the S.BUS2 socket. It also allows you to connect the FS-RM005 transmitter module to control Kyosho Mini-Z Evo models.

The T4PM plus transmitter, in a classic steering wheel design with a handle that fits perfectly in the hand, is equipped with steering wheel controls, an accelerator handle, two push-button switches, one knob and five digital overlays (3 around the steering wheel, 2 on the handle). Three buttons and a multifunction joystick are used for programming; easy orientation in the intuitive menu is provided by a large backlit LCD display. The T4PM has memory for 40 models and a wide range of advanced programming features for regular and special car models - e.g. independent control and drive (2 controllers) of front and rear wheels for tracks, dual-circuit brakes for large 1:5 models, gyroscope for drifting, ABS, traction control, tank compound, etc.

To run the transmitter, you will need 3 AA alkaline batteries or rechargeable NiMH batteries stored in the holder supplied with the transmitter, or a 4-5-cell NiMH or 2S LiFe battery.

T-FHSS SR transmission system

The super-fast transmission system (servo signal period of 2.45ms or repetition rate of 408Hz) allows the use of only special Futaba SR digital servos with extremely fast response on channels selected in the transmitter for which SR mode is enabled. On other channels where SR mode is not enabled, it is possible to use ordinary digital servos and speed controllers. Analog servos MUST NOT be used. It does not allow telemetry data transmission.

T-FHSS transmission system: Normal/high speed mode

This transmission system allows transmission of telemetry data from sensors connected to the S.BUS2 socket on the receiver. "Normal" mode allows the use of any servos (analog and digital) or RC devices, given that the repetition period of servo signals is 15 ms (repetition rate of 66.7 Hz). Only digital servos and most other devices, such as speed controllers for AC motors, can be used in "High Speed" mode. The repetition period of servo signals is 3.3 ms (repetition rate of 303 Hz). NOTE: The transmitter is not compatible with T-FHSS Air system receivers for flying models.

S-FHSS transmission system: normal/high speed mode

"Normal" mode allows the use of any servos or RC devices, given that the repetition period of servo signals is 13.6 ms (repetition rate of 73.5 Hz). The "High Speed" mode can only be used by digital servos, including the BLS series and most other devices such as speed controllers for AC motors. The repetition period of servo signals is 6.8 ms (repetition rate of 147 Hz).

FEATURES:

• Transmission system T-FHSS SR (without telemetry), T-FHSS-2.4GH with telemetry, S-FHSS (without telemetry) and two systems for Kyosho Mini-Z RC cars - MiniZ to Futaba RA-42 receivers and MiniZ/FHSS ( requires transmitter module FS-RM005) directly to Mini-Z EVO.
• 4 proportional channels
• Steering wheel control with adjustable neutralization
• Throttle lever with adjustable range of motion neutralization for braking/reverse function
• 2 pushbutton switches (assignable)
• 1 rotary knob (assignable)
• 5 digital trimmers (assignable)

Software functions:

• Memory for 40 models with copy, reset and set model name up to 10 characters
• Transmission system selection: T-FHSS SR, T-FHSS, S-FHSS (Normal or High Speed modes)
• Setting of deviation magnitude for all channels
• Reversal of deviation direction for all channels
• Subtrims for all channels
• Exponential deviation waveform for control and throttle
• Speed servo for steering and throttle
• Double deflection of steering wheel
• Pitch acceleration
• ABS
• Safe idle
• Throttle/brake control modes
• Traction control
• Controller assignments for channels 3 and 4
• Safe emergency deviation for all channels
• S.BUS service setting
• Remote control of software functions of Futaba speed controllers
• Assignment of trim functions
• Assignment of switch functions
• Mix for control with 2 servos
• Front/rear brake mix with 2 servos
• Gyro control mix
• 4WS mix for independent front and rear axle control for tracked vehicles
• Powertrain mix with 2 speed controllers
• CPS mix for LED lighting control
• Tank mix - for motion control of tracked vehicles
• 2 freely programmable mixes
• 3 timers (stopwatch, timer, lap time with 100 laps memory)
• Telemetry display
• Setup of telemetry sensors

Compatible receivers:

• Futaba R202GF S-FHSS/FHSS-2.4 GHz (2 channels only)
• Futaba R203GF S-FHSS/FHSS-2.4 GHz (3-channel)
• Futaba R204GF-E S-FHSS/FHSS-2.4GHz (4-channel, for powered models only)
• Futaba R2104GF S-FHSS/FHSS-2.4GHz (4-channel, 4.8-6.0V power supply, not for WN servos)
• Futaba R304SB T-FHSS-2.4GHz with telemetry on S.BUS2 (4-channel)
• Futaba R304SB-E T-FHSS-2.4GHz with telemetry on S.BUS2 bus (4-channel, for electric drive models only)
• Futaba R334SBS T-FHSS SR/T-FHSS 2.4GHz with telemetry on S.BUS2 bus (4-channel)
• Futaba R334SBS-E T-FHSS SR/T-FHSS 2.4GHz with telemetry on S.BUS2 bus (4-channel, for electric powered models only)

RC KIT INCLUDES:

• Futaba T4PM Plus 2.4GHz transmitter
• R334SBS receiver with telemetry
• Plastic screwdriver
• 2 allen handles
• Operating instructions

*Follow the instructions included with the product.