FUTABA SENSOR SPEED SENSOR (SBS-01TAS)

Telemetry sensor - speedometer with pitot tube for Futaba RC kits with FASSTest and T-FHSS Air (for aircraft) telemetry transmission systems. It consists of control electronics and a Pitot tube connected by a silicon tube. Allows measurement of true airspeed (the speed of the model relative to the surrounding air). Ideal for measuring the true airspeed of aircraft and similar applications. The sensor's operating status is indicated by an LED.

• Compatible receivers: Futaba receivers with S.BUS2 port
• Connection to the receiver: socket S.BUS2
• Number of addresses required by the sensor: 1*
• Default address number setting (starting address): 16*
• Transmitted telemetry data: actual air speed
• Typical mounting: control electronics in a suitable place in the fuselage or wing of the model where it is not exposed to direct airflow; Pitot tube is mounted in the leading edge of the wing away from the propeller-driven airflow, in gliders or jets in the nose
• Power supply 3.7-7.4V (nominal battery voltage)
• The sensor kit includes: sensor SBS-01TAS with cable, pitot tube with cap, silicone tube, instructions.
  
  *) Telemetry sensors are identified on the S.BUS2 serial bus by an address number ("slot"); more complex sensors transmitting more than one data may require several consecutive addresses, in which case the first address belonging to the sensor is called the start address.

Technical data:

• Power supply: 3.5-8.4 V
• Measured speed range: 15-600 km/h
• Length (with cables): 195 mm
• Weight: 16 g (with pitot tube and silicone tubes)

*Follow the enclosed instruction manual.