KAVAN EPOXY 5min / 25g METAL - resin (syringe)

Top quality 5-minute two-component epoxy adhesive with metal filler. Packaging: double dispenser (syringe) 25 ml (P+T).
Two-component epoxy adhesive with metal filler for reliable bonding and sealing of various metals and other materials; sealing of improperly drilled holes, damaged edges, cracks, etc. Easy to sand and repaint. Resistant to temperatures up to +120°C.

Properties:

• Mixing ratio: 1:1 (by volume and weight)
• Viscosity (after mixing): 20000-25000 mPa.s
• Working time (until gelling): approx. 4-6 min (20°C to 25°C)
• Bonded parts can be handled: after 10-12 min.
• Half strength: after 10-12 min
• Full strength: after 2-3 h
• Full cure: 16-24 h
• Density: 1.3 g/cm3
• Shear strength: 14-18 N/mm2
• Temperature resistance of bonded joint: -40°C to +120°C
• Removal of excess uncured adhesive: with a cloth or paper towel moistened with denatured alcohol.

Use as glue-sealer: optimum gap width between glued elements 0,1-0,2 mm.

Suitable for gluing: metals, wood, plywood, ceramics, porcelain, glass and carbon laminates.

Not suitable for bonding: soft and flexible plastics (including EPP and EPO), polyethylene, Teflon.

Storage: in a tightly closed container, in a cool, dry and dark place (at a temperature of 10°C to 25°C). Do not expose to temperatures below 10°C. Be careful not to confuse the resin and hardener caps - even a small amount of hardener can degrade large amounts of resin. Keep away from children.

The product contains substances classified as hazardous according to Regulation (EC) No. 1272/2008. For details, see the "Downloads" section.

*Follow the enclosed instruction manual, when gluing, take special care and safety precautions