DUALSKY SPEED ADJUST 130A V2 OPTO HV

DUALSKY 130A, 44V speed controller for 3-phase motors.

The controller has firmware in version V.2 where:

• DL BM BRAKE support
• programmable from the transmitter stick or from a PC; connection with a computer is possible thanks to the optional DUALSKY USB Link card
• field programming possible with Dualsky ProgCARD
• The regulator on the package side is equipped with ANTI SPARK connectors and on the engine side with DB6 connectors (gold 6mm) - for soldering on cables
• OPTO isolation of the power section from the control section - prevents interference
• a set of protections: against low voltage, overheating, cut-off at loss of signal
• linear, smooth gas regulation in the entire range of movement of the stick
• 14ms (normal mode) and 7ms (high speed) control signals support
• the ability to calibrate the gas control range for full compatibility with each transmitter

Basic Features:

• maximum continuous current: 130 A with 12S Lipo or 150A with 6S Lipo
• maximum instantaneous current (15 sec): 150A with 12S Lipo power supply or 180A with 6S Lipo power supply
• 5-12 cells Li-Ion / Li-pol (18.5-44.4 V), 15-36 cells Ni-Cd / Ni-MH (18-43.2 V)
• internal resistance: 0.0023 Ohm
• BEC - NONE (OPTO controller)
• engine support: up to 210,000 rpm (2-pole), 70,000 rpm (6-pole) and 35,000 rpm (12-pole)
• programmable timing: normal, soft and super-soft
• programmable cut-off with the setting: engine shutdown / power reduction
• programmable cut-off voltage (e.g. 2.5 / 2.75 / 3.0 V / cell)
• Programmed governor mode: enabled / disabled
• programmed type of cells: Li-xxx / Ni-xx
• programmable brake: on / off
• dimensions: 90x55x27 mm
• weight: 185g
• power cables: 10AWG, ANTI SPARK connectors
• motor cables: 10AWG, DB6 6mm connectors
• purpose: large models of airplanes for combustion engine 60cc