DUALSKY DRIVE UNIT 480 (TC.3A.480)

Drive kit designed for 480-class electric models.

Included:

• Dualsky ECO 2316C-1250kV 2 motor
• Dualsky XC-45-LITE regulator

V2 version ECO-C engine dedicated to aircraft models. Attractive price with Dualsky brand quality.

The ECO series engines have changed their model designations making them more similar to that of other popular engines like AXi, EMAX, RAY, FOXXY etc. Now the motor model name is based on the diameter and length of the stator and KV.

The Dualsky ECO Series motor family covers the range of the most commonly used drive units: from the smallest to the 900W. A wide selection of KVs allows for precise selection of a motor for a specific application. A part of them is also suitable for use in multicopter platforms (ECO-X line).

Features of ECO V2 engines:

• 25% more powerful design compared to the ECO series while maintaining the same weight
• engine life increased by 50% compared to the previous ECO series
• reinforced axles
• dynamically balanced rotor
• optimized heat dissipation
• waterproof controller - ready for rain and humidity - NOTE bearings are not waterproof!
• NEW DETERMINATION RULES based on stator diameter and length and KV (revolutions per volt of no-load voltage)
• a wide selection of models in the most popular sizes up to over 2000W and optimized KV parameters
• standard length wiring with factory soldered connectors (connector sockets for soldering on regulator cables are included)
• motor shaft extending from stator side
• reversible mounting option, hub to bolt onto rotor included
• mounting cross member and screws included
• aluminum alloy motor housing, CNC-machined and anodized
• NMB bearings
• N4SH magnets
• model markings are laser-engraved onto the rotor so any impact on balance is eliminated
• product aimed at intermediate aircraft and multicopter pilots guaranteeing high quality at a low cost of purchase
• product packaged in an aesthetically pleasing box

Basic specifications:

• dimensions: 28.8x32.9mm
• axis diameter: 3.175mm
• mounting screw spacing: 16/16 mm
• power supply: 2-3 Li-pol cells
• weight (without cables): 72 g
• KV: 1250 rpm
• recommended propellers: 2S: 12x6, 13x6.5 / 3S: 9x6, 10x7
• highest efficiency at load: 18A
• maximum instantaneous load: 30A (up to 15 seconds)
• maximum power (15 seconds): 360W
• no-load current consumption (10V): 1A
• internal resistance: 52.2 mOhm
• recommended regulator: 30-45A e.g.. dualsky series
• application: aircraft models weighing 600-1400g
• complete with: cross-bracket for mounting, propeller hub for reverse mounting, male connectors type DB3 3.5 mm soldered on cables + connector sockets and heat shrink tubing

plus Dualsky XC-45 LITE controller:

Lite series 45A speed controller, very wallet-friendly but superior in quality and features to low-budget controllers from other manufacturers. User feedback and expectations were taken into account in the development of these regulators, making Dualsky's very good and reliable solutions now available to a wider range of customers.

Recommended for 3D models due to high precision power control.

Basic parameters:

• 45A continuous current (500W maximum power)
• momentary current 60A (maximum instantaneous power 666W)
• 2-3 Li-Ion/Li-pol cells (7.4-11.1V), 5-9 Ni-Cd/Ni-Mh cells (6.0-10.8V)
• BEC 5.2V/3A; (for 3-4 micro servos); for more servos it is recommended to use the DUALSKY voltage regulator
  
• motor support: up to 210000 rpm (2-field), 70000 rpm (6-field) and 35000 rpm. (12-field)
• programmable timing: normal, soft
• programmable power supply type: Ni-xx/Li-xxx
• programmable cut-off with setting: motor shutdown/power reduction
• programmable cut-off voltage: low/middle/high
• programmable brake: on/off
• governor mode
• possibility to program from the transmitter (with the throttle stick) or with the Dualsky V2 programming card
• purpose: 450-class 3D electric helicopters, sport and recreational aircraft up to 0.32 i.e. the equivalent of 5.25cc internal combustion filaments
• internal resistance: 0.0025 Ohm
• sizes: 67x25x7 mm
• weight: 38 g (with cable)
• length of signal cable: 30 cm
• the regulator is not equipped with connectors

Instructions: TU